A Guide To Washing Machine Repair

We use washing machines all the time. Whether you are washing the kid’s dirty laundry at home or working in a hotel where you manage all of the linens, you undoubtedly use a washing machine on a regular basis. Unfortunately, washers are not immune to problems and you are bound to experience the occasional need for washing machine repair in Los Angeles. When this happens, turn to AmeriPro. We are the leading washing machine repair company in Los Angeles.

Common Problems With Washing Machines

Here are some of the most common issues we see during washer repair calls. If you notice any of these problems, give us a call for a free washing machine repair estimate.

  • Washer is shaking or vibrating
  • Water isn’t draining properly
  • Washer isn’t filling correctly
  • The spin cycle won’t work
  • Water is leaking from machine or attached hoses
  • Cycle is interrupted and won’t finish
  • Strange sounds
  • Clothes are too soaking wet after a cycle
  • Broken digital display
  • Non-functioning pump
  • Bad odor coming from the washer
  • Temperature is not correct
  • The door is jammed or locked
  • Washer will not start or stop

Troubleshoot Your Washer

When you notice a problem with your washing machine, try these simple steps to troubleshoot the solution on your own. This could save you from needing professional washing machine repair in Los Angeles.  Use this checklist to troubleshoot your own washer.

    Is the washer receiving power?

  • Is the washer plugged in?
  • Did you close the door properly?
  • Did you select a wash cycle and turn it on?
  • Are the hoses connected properly to the back of your washer?
  • Are the water hoses kinked behind the washer?

Help! My Washer is Full of Water

This is one of the most common calls we get regarding washer repair in Los Angeles. First of all, make sure you have given the washer sufficient time to drain after a cycle is complete. Check to make sure there are no blockages or clogs in the hoses or filter. This could prevent proper drainage.

In order to troubleshoot your appliance, you might need to drain the water manually and remove the clothes. Make sure your washer is unplugged or cut off the power source completely if you cannot reach the outlet to unplug it. Next, look for the outlet pipe where the drain hose is located. Place this hose into a bowl on the floor so the water can drain out. You may have to empty the bowl a few times to get all the water out, but it’s an important step to prevent your clothes from mold and mildew while you are waiting on washer repair in LA.

Help! My Washing Machine Won’t Open

If the door won’t open, check and make sure that it is programmed to off. Sometimes the door will lock based on its current place in a wash cycle. This is an automatic locking mechanism made to prevent the washer from being interrupted mid-cycle. If your washer has this feature, it should also have a “stop” button or a way to move the program position so that the door is unlocked.

If your washer has already finished the full cycle and the door is still locked, give it a few minutes. Sometimes the manufacturer programs the washer to have a time delay for the unlock feature. This gives the washer a few more minutes to drain before clothes are accessible. If a few minutes pass, try draining the washer (unplug it first!) and the door should unlock. If it is still locked up tight, you will need help from a professional washing machine repair company in Los Angeles.

Help! My Washer Is Flooding the Floor!

Nothing can cause a homeowner to panic faster than a miniature flood right inside of the home. Unfortunately, this issue is not that uncommon for washing machines. We’ve seen it happen time after time in Los Angeles. If your washing machine floods, your first step should be to turn off the appliance. Make sure you turn off the inlet valves to keep water from entering the washer. Usually the flood is caused when a water valve doesn’t close properly. By eliminating the incoming water source, you will stop the flood. If all else fails, turn off the water for your entire home.

Contact AmeriPro for washing machine repair in Los Angeles if you experience a flooded machine. You will undoubtedly need professional repair assistance to resolve the problem. Keep in mind that any damage you incurred to your home or even clothes should be covered by your manufacturer’s warranty or homeowner’s insurance.

Warning About Washing Machine Repair in LA

While you can often troubleshoot appliances on your own, you should exercise caution. Remember that your washer is an electrical appliance and you need to take proper care to avoid injury. Always make sure your first step is to unplug the washer or switch off the power at your fuse box. This is especially important in situations where there is standing water that could be a risk for electrocution.

AmeriPro Repairs All Brands of Washing Machines

At AmeriPro, we repair many brands of washers. Here are some of the most common makes and models we work on:

  • Amana
  • Asko
  • Bosch
  • Electrolux
  • FCI
  • Fabor
  • Fisher & Paykel
  • General Electric
  • GE Monogram
  • Hotpoint
  • Jenn-Air
  • LG
  • Maytag
  • Panasonic
  • Samsung
  • Sanyo
  • Sharp
  • Westinghouse
  • Whirlpool

Call AmeriPro Today for Washing Machine Repair in Los Angeles

If you need washing machine repair in Los Angeles, give us a call. Our customers enjoy many great benefits. Here are just a few of the reasons you should consider AmeriPro for your washing machine repair in LA:

  • Our technicians come to your home or business
  • We take washer repair calls 24/7
  • Same day service and emergency repair is available
  • Reliable, on time repair professionals
  • Free, no obligation estimate
  • No hidden charges or fees
  • We fix your washer right the first time
  • Competitive, affordable prices
  • Friendly customer service
  • Factory trained technicians
  • Factory-certified in all major washer brands